vak | PC-BSD на Lenovo Thinkpad W500

Протокол загрузки ядра FreeBSD 10.0 на ноутбуке Thinkpad W500.

FreeBSD is a registered trademark of The FreeBSD Foundation.

FreeBSD 10.0-RELEASE-p15 #0: Wed Jul 9 15:46:53 UTC 2014

root@amd64-builder.pcbsd.org:/usr/obj/usr/src/sys/GENERIC amd64

FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610

CPU: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz (2793.06-MHz K8-class CPU)

Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17 Stepping = 6

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>

AMD Features=0x20100800<SYSCALL,NX,LM>

AMD Features2=0x1<LAHF>

TSC: P-state invariant, performance statistics

real memory = 5838471168 (5568 MB)

avail memory = 3981266944 (3796 MB)

Event timer "LAPIC" quality 400

ACPI APIC Table: <LENOVO TP-6F >

FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs

FreeBSD/SMP: 1 package(s) x 2 core(s)

cpu0 (BSP): APIC ID: 0

cpu1 (AP): APIC ID: 1

ioapic0: Changing APIC ID to 1

ioapic0 <Version 2.0> irqs 0-23 on motherboard

kbd1 at kbdmux0

random: <Software, Yarrow> initialized

cryptosoft0: <software crypto> on motherboard

aesni0: No AESNI support.

acpi0: <LENOVO TP-6F> on motherboard

CPU0: local APIC error 0x40

acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0

acpi0: Power Button (fixed)

acpi0: reservation of 0, a0000 (3) failed

acpi0: reservation of 100000, 9ff00000 (3) failed

cpu0: <ACPI CPU> on acpi0

cpu1: <ACPI CPU> on acpi0

attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0

Timecounter "i8254" frequency 1193182 Hz quality 0

Event timer "i8254" frequency 1193182 Hz quality 100

hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0

Timecounter "HPET" frequency 14318180 Hz quality 950

Event timer "HPET" frequency 14318180 Hz quality 450

Event timer "HPET1" frequency 14318180 Hz quality 440

Event timer "HPET2" frequency 14318180 Hz quality 440

Event timer "HPET3" frequency 14318180 Hz quality 440

atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0

Event timer "RTC" frequency 32768 Hz quality 0

Timecounter "ACPI-fast" frequency 3579545 Hz quality 900

acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0

acpi_lid0: <Control Method Lid Switch> on acpi0

acpi_button0: <Sleep Button> on acpi0

pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0

pci0: <ACPI PCI bus> on pcib0

pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0

pci1: <ACPI PCI bus> on pcib1

vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xc0000000-0xcfffffff,0xbfff0000-0xbfffffff irq 16 at device 0.0 on pci1

vgapci1: <VGA-compatible display> port 0x1800-0x1807 mem 0xf4400000-0xf47fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0

agp0: <Intel GM45 SVGA controller> on vgapci1

agp0: aperture size is 256M, detected 32764k stolen memory

vgapci1: Boot video device

pci0: <simple comms> at device 3.0 (no driver attached)

pci0: <simple comms, UART> at device 3.3 (no driver attached)

em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x1840-0x185f mem 0xfc200000-0xfc21ffff,0xfc225000-0xfc225fff irq 20 at device 25.0 on pci0

em0: Using an MSI interrupt

em0: Ethernet address: 00:1c:25:9b:f8:3d

uhci0: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 20 at device 26.0 on pci0

usbus0 on uhci0

uhci1: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 21 at device 26.1 on pci0

usbus1 on uhci1

uhci2: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 22 at device 26.2 on pci0

usbus2 on uhci2

ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc226c00-0xfc226fff irq 23 at device 26.7 on pci0

usbus3: EHCI version 1.0

usbus3 on ehci0

hdac0: <Intel 82801I HDA Controller> mem 0xfc220000-0xfc223fff irq 17 at device 27.0 on pci0

pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0

pci2: <ACPI PCI bus> on pcib2

pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0

pci3: <ACPI PCI bus> on pcib3

iwn0: <Intel WiFi Link 5100> mem 0xf4200000-0xf4201fff irq 17 at device 0.0 on pci3

pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0

pci4: <ACPI PCI bus> on pcib4

pci4: <memory> at device 0.0 (no driver attached)

pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0

pci5: <ACPI PCI bus> on pcib5

pcib6: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0

pci13: <ACPI PCI bus> on pcib6

uhci3: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 16 at device 29.0 on pci0

usbus4 on uhci3

uhci4: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 17 at device 29.1 on pci0

usbus5 on uhci4

uhci5: <Intel 82801I (ICH9) USB controller> port 0x1c00-0x1c1f irq 18 at device 29.2 on pci0

usbus6 on uhci5

ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc227000-0xfc2273ff irq 19 at device 29.7 on pci0

usbus7: EHCI version 1.0

usbus7 on ehci1

pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0

pci21: <ACPI PCI bus> on pcib7

cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf4800000-0xf4800fff irq 16 at device 0.0 on pci21

cardbus0: <CardBus bus> on cbb0

pccard0: <16-bit PCCard bus> on cbb0

pci21: <serial bus, FireWire> at device 0.1 (no driver attached)

sdhci_pci0: <RICOH R5C822 SD> mem 0xf4801800-0xf48018ff irq 18 at device 0.2 on pci21

sdhci_pci0: 1 slot(s) allocated

pci21: <base peripheral> at device 0.3 (no driver attached)

pci21: <base peripheral> at device 0.4 (no driver attached)

pci21: <base peripheral> at device 0.5 (no driver attached)

isab0: <PCI-ISA bridge> at device 31.0 on pci0

isa0: <ISA bus> on isab0

ahci0: <Intel ICH9M AHCI SATA controller> port 0x1c48-0x1c4f,0x183c-0x183f,0x1c40-0x1c47,0x1838-0x183b,0x1c20-0x1c3f mem 0xfc226000-0xfc2267ff irq 16 at device 31.2 on pci0

ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported

ahcich0: <AHCI channel> at channel 0 on ahci0

ahcich1: <AHCI channel> at channel 1 on ahci0

pci0: <serial bus, SMBus> at device 31.3 (no driver attached)

acpi_tz0: <Thermal Zone> on acpi0

acpi_tz1: <Thermal Zone> on acpi0

atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0

atkbd0: <AT Keyboard> irq 1 on atkbdc0

kbd0 at atkbd0

atkbd0: [GIANT-LOCKED]

psm0: <PS/2 Mouse> irq 12 on atkbdc0

psm0: [GIANT-LOCKED]

psm0: model Generic PS/2 mouse, device ID 0

battery0: <ACPI Control Method Battery> on acpi0

acpi_acad0: <AC Adapter> on acpi0

orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xde000-0xdf7ff,0xe0000-0xeffff on isa0

sc0: <System console> at flags 0x100 on isa0

sc0: VGA <16 virtual consoles, flags=0x300>

vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

ppc0: cannot reserve I/O port range

est0: <Enhanced SpeedStep Frequency Control> on cpu0

p4tcc0: <CPU Frequency Thermal Control> on cpu0

est1: <Enhanced SpeedStep Frequency Control> on cpu1

p4tcc1: <CPU Frequency Thermal Control> on cpu1

ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;

to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.

ZFS filesystem version: 5

ZFS storage pool version: features support (5000)

Timecounters tick every 1.000 msec

hdacc0: <Conexant CX20561 (Hermosa) HDA CODEC> at cad 0 on hdac0

hdaa0: <Conexant CX20561 (Hermosa) Audio Function Group> at nid 1 on hdacc0

pcm0: <Conexant CX20561 (Hermosa) (Front Analog)> at nid 22 and 24 on hdaa0

pcm1: <Conexant CX20561 (Hermosa) (Internal Analog)> at nid 26 and 29 on hdaa0

hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0

unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached)

random: unblocking device.

usbus0: 12Mbps Full Speed USB v1.0

usbus1: 12Mbps Full Speed USB v1.0

usbus2: 12Mbps Full Speed USB v1.0

usbus3: 480Mbps High Speed USB v2.0

usbus4: 12Mbps Full Speed USB v1.0

usbus5: 12Mbps Full Speed USB v1.0

usbus6: 12Mbps Full Speed USB v1.0

usbus7: 480Mbps High Speed USB v2.0

ugen2.1: <Intel> at usbus2

uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2

ugen1.1: <Intel> at usbus1

uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1

ugen0.1: <Intel> at usbus0

uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0

ugen4.1: <Intel> at usbus4

uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4

ugen3.1: <Intel> at usbus3

uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3

ugen7.1: <Intel> at usbus7

uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7

ugen6.1: <Intel> at usbus6

uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6

ugen5.1: <Intel> at usbus5

uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5

ada0 at ahcich0 bus 0 scbus0 target 0 lun 0

ada0: <HTS541080G9SA00 MB4OC60R> ATA-7 SATA 1.x device

ada0: Serial Number MPBDL0XNG0A89M

ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)

ada0: Command Queueing enabled

ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)

ada0: Previously was known as ad4

cd0 at ahcich1 bus 0 scbus1 target 0 lun 0

cd0: <MATSHITA DVD-RAM UJ862A SB04> Removable CD-ROM SCSI-0 device

cd0: Serial Number HE96 217254

cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)

cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed

Netvsc initializing... SMP: AP CPU #1 Launched!

uhub0: 2 ports with 2 removable, self powered

uhub1: 2 ports with 2 removable, self powered

uhub7: 2 ports with 2 removable, self powered

uhub3: 2 ports with 2 removable, self powered

uhub2: 2 ports with 2 removable, self powered

uhub6: 2 ports with 2 removable, self powered

Root mount waiting for: usbus7 usbus3

uhub4: 6 ports with 6 removable, self powered

uhub5: 6 ports with 6 removable, self powered

Root mount waiting for: usbus7 usbus3

ugen7.2: <Ericsson> at usbus7

ugen3.2: <Chicony Electronics Co., Ltd.> at usbus3

Trying to mount root from zfs:tank/ROOT/default []...

ugen1.2: <vendor 0x08ff> at usbus1

ugen4.2: <Microsoft> at usbus4

ums0: <EndPoint1 Int Pipe> on usbus4

ums0: 3 buttons and [XYZ] coordinates ID=0

ugen1.3: <Lenovo Computer Corp> at usbus1

GEOM_ELI: Device label/swap0.eli created.

GEOM_ELI: Encryption: AES-XTS 128

GEOM_ELI: Crypto: software

ubt0: <Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II, class 224/1, rev 2.00/3.99, addr 3> on usbus1

Cuse4BSD v0.1.33 @ /dev/cuse

acpi_video0: <ACPI video extension> on vgapci0

acpi_video1: <ACPI video extension> on vgapci1

fuse-freebsd: version 0.4.4, FUSE ABI 7.8

wlan0: Ethernet address: 00:21:6b:92:02:2e

umodem0: <Ericsson F3507g Mobile Broadband Minicard Modem> on usbus7

umodem0: data interface 2, has CM over data, has break

WARNING: attempt to domain_add(bluetooth) after domainfinalize()

WARNING: attempt to domain_add(netgraph) after domainfinalize()

ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled

umodem1: <Ericsson F3507g Mobile Broadband Minicard Data Modem> on usbus7

umodem1: data interface 4, has CM over data, has break

cdce0: <Ericsson F3507g Mobile Broadband Minicard Network Adapter> on usbus7

ue0: <USB Ethernet> on cdce0

ue0: Ethernet address: 02:80:37:ec:02:00

umodem2: <Ericsson F3507g Mobile Broadband Minicard GPS Port> on usbus7

umodem2: data interface 12, has CM over data, has break

umodem2: no data interface

device_attach: umodem2 attach returned 6

umodem2: <Ericsson F3507g Mobile Broadband Minicard GPS Port> on usbus7

umodem2: data interface 12, has CM over data, has break

umodem2: no data interface

device_attach: umodem2 attach returned 6

PC-BSD на Lenovo Thinkpad W500

no subject

no subject